The powered respirator keeps fresh, clean air pumping around your face so that you can breathe easily while you weld.

Provides industrial-level protection for the most extreme welding applications and environments where effective and reliable eye and respiratory protection is an absolute must.

It has a filter efficiency of 99.996% @ 0.3um, which means that welding fumes, particles and gases are all being filtered to provide you with clean, fresh air.

The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours of use on level 1, 6 hours on level 2, and 4 hours on level 3 airflow setting.

ELITEVISION™ Lens Technology greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding.

External grind button, so you can keep it on while you’re grinding, no need to remove your safety gear or fiddle around with flip lens or hoods.

With a built-in 4400mAH lithium-ion battery, it’s quick and easy to recharge with the supplied power adapter. With up to 8 hours of battery life on the lowest intensity settings, you can work an entire shift before it needs to be charged again. Lasts up to 4 hours in the highest intensity setting.

Welding helmet lenses are graded on a rating system from 1 to 3 across four categories, with 1 being the highest and 3 being the lowest. This helmet features the maximum 1/1/1/1 classification for optical quality, diffusion of light, light consistency and angle dependence.

The three most frequently used settings can be stored and reactivated easily by using the three memory buttons on the Auto-Darkening Filter (ADF).

Positive pressure system that provides constantly stable clean air

Long-lasting reliable P2 filter.

Auto shutdown mode.

3 airflow levels for varied working conditions.

Flashing and audible alarms indicate low battery, low airflow, filter blockage and high battery temperature.

The respirator unit is fitted with a spark filter and a replaceable pre-filter to protect and extend the life of the main filter.

Shoulder harness for extended wear.

Side or rear mounting of respirator pack.

Controls down after 30mins of no use.

The LCD display clearly shows airflow level, battery charge level and filter status.

The ergonomic design, lightweight shell, and fully adjustable headgear & back harness deliver maximum comfort during long welding periods.

The quick-disconnect and swivel breathing tube provide easy adjustability to accommodate space restraints.

Features the latest digitally-controlled auto-darkening filter, adjustable from shade 5-9 and shade 9-13 making it ideal for MMA, TIG and MIG welding, as well as Plasma Cutting and even grinding applications.